To download the Troubleshooting guide, click here.
To download the Quick Reference Troubleshooting Guide (Installer), click here.
To download the Quick Reference Troubleshooting Guide (User), click here.
A | HEIGHT IS DISPLAYED IN CENTIMETERS (ACTIVE TOUCH CONTROLLER)
- Press and hold the 1 and
buttons simultaneously for 3 seconds.
- The display will change from “CM” to “INCH” or “INCH” to “CM”.
- The new selection will flash until the light guide fills. When all three bars are full, the height selection is saved.
A | HEIGHT IS DISPLAYED IN CENTIMETERS (4 PRESET PROGRAMMABLE CONTROLLER):
Press and hold the S button
A | HEIGHT IS DISPLAYED IN CENTIMETERS (3 PRESET PROGRAMMABLE CONTROLLER):
Press and hold the S button
B | HEIGHT OF THE DESK DOES NOT MATCH DISPLAY (ACTIVE TOUCH CONTROLLER):
- On the Controller, press 1, 2, 1, 2.
- The display will begin blinking “SELECT”, “HEIGHT”.
- Press down on the Controller to select the correct lowest starting height, 22.6” or 27.3”. Extended height (dual-stage) is 22.6” and Basic height (single-stage) is 27.3”.
- Wait for 2 seconds until the light guide fills. When all three bars are full, the height selection is saved.
B | HEIGHT OF THE DESK DOES NOT MATCH DISPLAY (4 PRESET PROGRAMMABLE CONTROLLER)
Press the S button and the up or down button simultaneously, until the digital-display shows the correct height.
B | HEIGHT OF THE DESK DOES NOT MATCH DISPLAY (3 PRESET PROGRAMMABLE CONTROLLER)
Press the S button and the up or down button simultaneously, until the digital-display shows the correct height.
TROUBLESHOOTING GUIDE
| Complete Troubleshooting Guide | |
|
|