In this article:
To download the Troubleshooting guide, click here.
A | HEIGHT IS DISPLAYED IN CENTIMETERS (ACTIVE TOUCH CONTROLLER)
- Press and hold the 1 and buttons simultaneously for 3 seconds.
- The display will change from “CM” to “INCH” or “INCH” to “CM”.
- The new selection will flash until the light guide fills. When all three bars are full, the height selection is saved.
B | HEIGHT OF THE DESK DOES NOT MATCH DISPLAY (ACTIVE TOUCH CONTROLLER):
- On the Controller, press 1, 2, 1, 2.
- The display will begin blinking “SELECT”, “HEIGHT”.
- Press down on the Controller to select the correct lowest starting height, 22.6” or 27.3”. Extended height (dual-stage) is 22.6” and Basic height (single-stage) is 27.3”.
- Wait for 2 seconds until the light guide fills. When all three bars are full, the height selection is saved.
TROUBLESHOOTING GUIDE
Complete Troubleshooting Guide |