To download the Office User Guide, click here.
To download the Home Office User Guide, click here.
1. Read all instructions before using this furnishing.
2. Always unplug this furnishing from the electrical outlet before cleaning or servicing.
3. Use this table only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
4. Never operate this table if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
5. Keep the cord away from heated surfaces.
6. Do not use outdoors.
7. For tables not provided with work surfaces: This furnishing is not complete until mated with a suitable work surface. Consult assembly directions for requirements.
8. Detachable supply cord: use only type SJT 18 AWG cord.
PRODUCTS WITH POLARIZED PLUGS
POLARIZED PLUG INSTRUCTIONS
To reduce the risk of electrical shock, some furnishings have a polarized plug (one blade is wider than the other) like the plug illustrated in Fig. 1.
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
INSTRUCTIONS FOR DOUBLE INSULATED PRODUCTS
No grounding means is provided on a double-insulated product. Nor is a means for grounding to be added to the product.
The plug looks like the plug illustrated in Fig. 1. A double insulated product is marked with the words “double insulation”, “double insulated”, or .
Plug illustration disclaimer: Illustrations shown here may not match your product. Depending on your region, the plug pin size and shape may change.
PRODUCTS WITH GROUNDED PLUGS
GROUNDING INSTRUCTIONS
Some products must be grounded.
Connect these types of appliances to a properly grounded outlet in accordance with all local codes and ordinances.
For products sold in North America and other 120V regions: the product is for use on a nominal 120-V circuit. These products use a grounded plug that looks like the plug illustrated in sketch A in Fig. 2. Make sure that the product is connected to an outlet having the same configuration as the plug.
No adapter should be used with this product.
WARNING - RISK OF FIRE AND SHOCK, USE ONLY TYPE SJT 18 AWG CORD
Plug illustration disclaimer: Illustrations shown here may not match your product. Depending on your region, the plug pin size and shape may change.
FCC
This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 for FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet or a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada